It groups the colloidal particles in suspension facilitating their subsequent removal in the filtration. This causes the pool water to have a more transparent and crystalline appearance.
POOL FLOCCULANT SUITABLE FOR ALL TYPES OF POOLS.
Do not use this product in Diatomaceous filter installation.

2. Main components
-Polyaluminium Chloride CAS: 1327-41-9

3. Characteristics
– Appearance: Transparent or slightly milky liquid
– Relative density: 1.04 g/cm3
– Water solubility: Fully soluble
– pH: 3.5

4. Instructions for use
-Measure and adjust the pH, if necessary, of the pool water in this range: 7.2-8.0.
-Similarly, measure and adjust the free chlorine in this range 0.5-2 ppm (If bromine 2.0-5.0)
-RECOVERY TREATMENT: After stopping the filtration equipment and without swimmers, add 2L of the product for every 100m3 of water. Dissolve the dose previously in a bucket of water, and distribute it over the entire surface of the pool. Let it act for 6-8h and remove the floc with the pool cleaner.
-MAINTENANCE TREATMENT: Add weekly, 1L for every 100m3 of water.
-Increase the dose according to the turbidity of the water. Use in ventilated areas. Wash hands after use.

5. Precautions and warnings
-Keep in the original container. Avoid water entering the container. Do not mix with other products. Keep away from incompatible substances.
-Keep out of reach of children and keep locked up. More safety information in the product safety data sheet.
-This dose is indicative, as it depends on the turbidity of the water and the use of the pool.
-Do not use with diatomaceous or cartridge filters.